Site mapContact us
CF, TFT, PDP processing machines

NC precision glass scribing machine

NC precision glass scribing machine
NC precision glass scribing machine (Shown in the figure is the G-5 glass type machine.)


This machine was developed for scribing FPD mother glass panels. This innovative multi-cutter machine with built-in NC unit was developed using technology and ideas original to SHIRAI. The machine consists of a DENSEPAK glass fetcher/loader unit, scribing unit, and breaking unit.
By inputting the scribing size into the upper computer, the cutters will automatically be aligned for the scribing operation (Scribing accuracy is within ±0.2mm).
Shown in the figure above is the G-5 glass type machine. Machines for G-6 glass or above consist of a DENSEPAK glass fetcher/loader unit, a 6-axial jointed-arm robot for removing the glass paper, and a breaking machine (all automatic machines).

{Processing sizes}
to G-5 from G-10, Specifications require separate discussions.
This can be connected to and used in the edge R-beveling machine and glass cleaning line.
(G7.5 mother glass processing tact time: Under 30 sec.)


* Machine details and specifications may be modified by SHIRAI TECH at any time without prior notice.


[ Return to list of CF, TFT, and PDP processing machines ]
SHIRAI TECH, LIMITED.
3-5-21, Kashita-nishi, Higashi-Osaka city, Osaka prefecture, 577-0835, Japan
TEL:06-6728-7615 FAX:06-6720-2390
Copyright (C) 2006 SHIRAI TECH Limited All rights reserved.